Crate FW412A

Crate FW412A

Crate FW412A Description:

Ride the dragon of raw stereo power with the new FW412A and FW412B speaker cabinets. Compatible with any Crate head, including the new FlexWave120H, and designed for the next generation of rock players, these 4x12" cabs are available in slanted (FW412A) model, and is guaranteed to produce gale-force movements of air.

With 120 watts of power handling capability, the FW412A and FW412B operate in either stereo or mono at 4 or 8 ohms.

The Crate FlexWave 412A guitar amplifier loudspeaker enclosure. The FlexWave 412A/B guitar cabinets are built from the finest materials and components available.

The cabinets are carefully constructed and then covered with extremely tough fabric-backed vinyl. The cabinets are then loaded with four custom designed 12" speakers.

The FlexWave 412A and 412B come standard with steel handles, a switchable, dual-impedance mono/stereo jackplate, and heavy-duty removable casters.

The FW412B features a straight baffle while the FW412A features a slanted top baffle.The FlexWave 412A and 412B enclosures are compatible with any Crate head, including the FlexWave 120H. With 120 watts of power-handling capacity, they can process everything from sparkling clean guitar sounds to face-melting distortion.

Like all Crate products, the FlexWave 412A and 412B guitar enclosures are designed by musicians and built using only the best components. Extensive testing confirms that these guitar enclosures are the absolute best they can be. In order to get the most out of your new guitar enclosure, we strongly urge you to read this manual before you begin playing.

The Input/Output Plate:

1.Impedance Selector Switch:

• Use this switch to select 16 ohm mono operation or 8 ohm stereo/4 ohm mono operation.

2. Out 1/4" Jack:

• When using the cabinet in the mono operating mode,use this jack to connect the cabinet to another speaker enclosure of the same impedance.

3. In/Left 1/4" Jack:

• When using the cabinet in the mono operating mode, use this jack as the cabinet's input jack. Connect the output of your amplifier to this jack by means of the speaker cable provided.
• When using the cabinet in the stereo operating mode, connect this jack to the left channel output of your amplifier.

4. Right 1/4" Jack:

• When using the cabinet in the stereo operating mode,connect this jack to the right channel output of your amplifier.
• When using the cabinet in the mono operating mode, this jack is not used. Refer to the illustrations on the right for additional information.

Crate FW412A Technical Specifications:

• Impedance 4 or 16 ohms Mono, 8 ohms Stereo
• RMS Power Rating 120 watts Mono, 60 watts Stereo
• Peak Power Handling 240 watts Mono, 120 watts Stereo
• Frequency Response 80 Hz - 5 kHz
• Sensitivity 96 dB SPL 1 watt/1 meter
• Maximum SPL 118 dB
• Transducers (4) Custom Design 12" 16 ohm 30 watt speakers
• Full Range Inputs (3) 1/4" jacks: Mono In/Out, Stereo Left and Right
• Dimensions (H x W x D) 31.5 in x 30.0 in x 14.0 in
• 80.0 cm x 76.2 cm x 35.6 cm
• Weight FW412A: 50.0 lb/22.7 kg
• FW412B: 52.0 lb/23.6 kg
• Specifications subject to change without notice.

Get your Crate FW412A today!