Nady 401X QUAD HM-10 Headset Systems

Nady 401X QUAD HM-10 Headset Systems

Featuring four independent VHF receivers in one convenient, rugged, all-metal, single-rack space housing the Nady 401X Quad wireless system makes operating 4 wireless systems at the same time easier than ever. This particular wireless mic system comes with four HM-10 headset microphones and 4 WLT bodypack transmitters. The versatility of the Nady 401X Quad wireless system extends to its dual antenna jacks which allow you to have either onboard or remote antennas. The rock-solid VHF performance is complemented by unmatched transparent audio with 120dB dynamic range and up to 500 feet optimum line-of-sight operation.

The Nady HM-10 ultra small condenser headset microphone is optimally designed for singing and speech applications. The HM-10's small size and light weight make it ideal for all handsfree use with minimum visibility. Perfect for singers/musicians (drummers, keyboardists), vocal/dance performers, DJs, television announcers, public speakers, and aerobics instructors. The Nady microphones have a 3.5mm phone plug that securely locks into the included WLT bodypack transmitters to give you true, handsfree operation. The WLT bodypacks work for up to 15+ hours on a single 9V battery sold separately) and have low-battery LED indicators, audio muting, and easily accessible volume control.

Nady 401X Quad HM-10 Headset Wireless System Features:

Front dual antenna jacks for either onboard or remote antennas

Front panel Power ON/OFF switch, plus Power ON LED, TX ON, and AF signal level LED displays

Noise-free transmitter ON/OFF operation

Rear panel individual XLR Output jacks, volume and RF mute controls for each of the 4 channels, and 4-Channels-Mixed AF Out 1/4" phone jack

High performance, transparent audio with 120dB dynamic range and up to 250+ feet optimum line-of-sight operation

4 transmitters can be operated simultaneously on the 4 different channels

WLT Bodypack Transmitter

Bodypack transmitter

OFF/STANDBY/ON switch allows convenient audio muting with the transmitter ON

Low-battery LED indicator flashes once for when unit is ON; lights steady for low battery alert - single 9V alkaline battery operation (15+ hours)

Locking 3.5mm mini-jack provides secure connection for removable microphone cable

Easily accessible input level adjust control for optimum sound

HM-10

Wide bandwidth omnidirectional electret condenser mic ensures clean transparent audio and enhanced vocal pickup with improved gain before feedback

Durable thin-metal frame can be easily molded to any user

Ergonomic design and comfortable fit with or without glasses, hats, or headphones and no hairstyle hindrance

Requires low voltage phantom power as supplied by most wireless bodypack transmitters

Supplied mini-XLR connects to plug of the microphone cable to the input jack of the bodypack transmitter or power supply adaptor

9~52V adapter supplied for wired applications

Nady 401X Quad HM-10 Headset Wireless System Specifications:

Wireless Mic System Performance

Frequency Response: 30-18KHz (-3dB)

Dynamic Range: 120dB (20-20KHz)

Total Harmonic Distortion: <0.5% (typical)

RF Carrier Frequency Range: 170-230MHz (Factory installed Channels)

Frequency Stability: +/- 0.005%, crystal controlled

Modulation: FM (F3E), +/-15KHz nor,+/-30KHz max

Operating Range: 250 feet typcial - up to 500+ feet optimum line-of-sight

HM-10

Element: Back electret condenser

Polar pattern: Omnidirectional

Frequency Response: 20Hz~20KHz

Sensitivity: -42±3dB

Output impedance: 1KO±5%

SPL max: 130dB

Power Supply: 1.5-10V D.C.

Cable: 1.5mm

Wiring: GND = Pin 1, Hot (+) = Pin 3 2 K_ Pin 2

Weight: 1.65 oz. (23g)

Mic Dimension: .197" (5 mm)

Output connector: 3-pin mini XLR connector

Low voltage Phantom Power required

Bodypack Transmitters

Audio Inputs: 3.5mm mono locking jack for connecting to omnidirectional lavalier mic with phantom power

Controls: OFF/STANDBY/ON switch, input level adjust

LED Indicator: Unit "ON" (single flash), Low Battery Alert (steady)

RF Power Out: 50mW (Max. allowed by FCC)

Harmonic & Spurious Emissions: <-40dB

Battery: 9V Alkaline

Battery Life: Up to 20 hours

Dimensions: 4.1"H X 2.4"W X 0.8"D (10.4cm X 6.1cm X 2.0cm)

Weight: 3.6oz. (101g)

Receiver

Controls Power ON/OFF, volume control, mute control

Connectors: 1 unbalanced adjustable mixed (all four channel), 1/4" T-S audio output jack. Line level, 600 ohms, 4 balanced fixed level XLR, #1=GND, #2-3=signals, Line/Mic level, 11k/600ohms

Receiver: 2.1mm barrel-type DC input jack (tip=positive)

LED Indicators: 1 Power ON LED, 4 AF LED, 4 TX ON LED

Dimensions: 1.75"H x 7.5"D x 16.5"W (4.4cm x 19cm x 42cm)

Weight: 4.5lb. (2kg)

Power Requirements: 16V @ 800mA, nominal, AC/DC adapter supplied

Antenna Connectors: Dual female BNC connectors

Get Your Nady 401X QUAD HM-10 Headset Systems Today!